H.U. Department of Mining Engineering Hacettepe University Turkish Projects Theses Courses Publications Resume Home

PUBLICATIONS

 

Articles

 

1. Benzer H., 2005, “Modelling and Simulation of Fully Air Swept Ball Mill in the Raw Material Grinding Circuit”, Powder Technology, 150 (2005) 145-154.

2. Benzer H., Ergün L., Lynch A.J., Öner M., Günlü A., Çelik İ., Aydoğan N., 2001, “Modelling Cement Grinding Circuits” Minerals Engineering, Nr14/11 pp1469-1482

3. Benzer H., Ergün L., Öner M., Lynch A.J., 2001, “Simulation of Open Circuit Clinker Grinding” Minerals Engineering, Nr.14/7 pp701-710

4. Lynch A. J., Öner M., Benzer H., 2000, “Simulation of Closed Cement Grinding Circuit”, ZKG, No. 53/10, pp 560-564.

5. Ergün L., Ekmekçi Z., Gülsoy Ö., Benzer H., 2004 “Modelling and Simulation of the Grinding Circuit in Madneuli Copper Concentrator”, Physicochemical Problems of Mineral Proccessing, Vol 38 pp231-240.

6. Genç Ö., Ergün L., Benzer H., 2004 “Single Particle Breakage Characterization of Materials by Drop Weight Testing”, Physicochemical Problems of Mineral Proccessing, Vol 38 pp 241-255.

7. Erdem S.A., Ergün L., Benzer H., 2004 “Calculation of the Power Draw of Dry Multi Compartment Ball Mills”, Physicochemical Problems of Mineral Proccessing, Vol 38. pp 221-230.

8. Ergün L., Ekmekçi Z., Gülsoy Ö., Benzer H., 2004 “Evaluation of the Flotation Circuit of Madneuli Copper Concentrator Using Plant Data”, Physicochemical Problems of Mineral Proccessing, Vol 38. pp 95-102.

9. Benzer H., Ergün L., Jankovic A., 2005 “Cement clinker grinding practice and technology”, SME Annual Meeting 27-29 Mart 2006 St. Louis (Sözlü sunuma kabul edildi).

10. Benzer H., Ergun L., Aydoğan N., 2001, “Design and Optimization of Cement Grinding Circuits Using Simulation” New Trends in Mineral Processing IV-Ostrava 28-30 Haziran 2001, pp103-111.

11. Benzer, H., Ergün, Ş.L., Ersayın, S., 1994, "The Effect of Heat Treatment on the Grindability and Liberation of Chromite Ores", in "Progress in Mineral Processing", A.T.Balkema Publishers, Demirel and Ersayın Ed., pp 33-37

 

Papers

 

1. Can M., Gülsoy Ö.Y., Ekmekçi Z, Ergün L., Benzer H., 2005 “Investigation of the Effect of the Retention Time and Fineness of Feed on Recovery by Simulation”, 19th International Mining Congress and Fair. (in Turkish)

2. Ekmekçi Z, Can M., Ergün L., Gülsoy Ö.Y., Benzer H., Çelik İ.B., 2005 “Performance Evaluation of CBI Flotation Plant Using Mineralogical Analysis”, 19th International Mining Congress and Fair.

3. Ergün L., Gülsoy Ö.Y., Can M., Benzer H., 2005 “Performance Evaluation Studies in Cayeli Grinding Circuit”, 19th International Mining Congress and Fair. (Sözlü sunuma kabul edildi).

4. Ergün L., Gülsoy Ö.Y., Can M., Benzer H., 2005 “Optimization of Cayeli Grinding Circuit By Modelling and Simulation”, 19th International Mining Congress and Fair. (Poster sunuma kabul edildi).

5. Aydoğan N.A., Ergün L., Benzer H., 2004 “High Pressure Grinding Rolls in Cement Industry”, Proc. Of JKMRC Student Conference, Brisbane, September. pp33-48. 

6. Benzer H., Ergün L., Lynch A.J., Öner M,2003, “Case Studies of Models of Tube Mill and Air Separator Grinding Circuits” , Proc. Of International Mineral Processing Congress-Cape Town, September 2003 pp 1524-1533.

7. Özer C.E., Ergün L., Benzer H., 2002, “Modelling of the Classification Behaviour of the Diaphragms Used in Multi-Compartment Mills” Proc. of 9th Int. Mineral Processing Symposium Extended Abstracts, 18-20 September Cappadocia Turkey pp148-150.

8. Aydoğan N.A., Ergün L., Benzer H., Kaya M., 2002 “Investigation of the Performance of High Pressure Grinding Rolls at Nuh Cement Plant”, Proc. of 9th Int. Mineral Processing Symposium Extended Abstracts, 18-20 September Cappadocia Turkey. pp 26-27.

9. Ergün L., Gülsoy Ö., Ekmekçi Z., Benzer H., 2002 “ Simulation Studies at a Copper Flotation Plant”, Proc. of 9th Int. Mineral Processing Symposium Extended Abstracts, 18-20 September Cappadocia Turkey. pp 151-153

10. Genç Ö., Benzer H., Ergün L., Öner M., 2002 “ Investigation of Breakage Behaviour of Clinker Particles by Drop Weight Testing”, Proc. of 9th Int. Mineral Processing Symposium Extended Abstracts, 18-20 September Cappadocia Turkey. pp 145-147.

11. Doğru T., Ateş M., Akyıldız A., Erduran C., Özekinci M., Ergün L., Gülsoy Ö., Ekmekçi Z., Benzer H., 2001 “Performance Evaluation Studies at Madneuli-Copper Flotation Plant”, IX. Balkan Mineral Processing Symposium, September, Istanbul Turkey , pp459-465.

12. Ergün,L., Siyahhan, S., Can, M., Benzer, H., 1999,"Performance of a Pinched Sluice for the Concentration of Very Low-Grade Chromite Ore" VIII.Balkan Mineral Processing Conference, Belgrade, Yugoslavia, September 13-18 pp471-478.

13. Ersayın S., Benzer H., Çelik İ.B., 1998, “Simulation as an aid to design: A case study”, 7th International Mineral Processing Symposium of Turkey, Eylül, pp 579-585.

14. Bayraktar İ., Ersayın S., Ergün L., Benzer H., Akgün M., 1999, “Gazbeton Üretimi için Kuvarsit Kırma-Öğütme Devresi Tasarımı ve Uygulama Sonuçları”, Türkiye 16. Madencilik Kongresi, Haziran, sf 303-312.

15. Benzer, H., Ersayın, S., 1997 “Application of Rod Mill Models To the Simulation of a Plant Scale Grinding” Proc. Of the 15th Mining Congress of Turkey, pp 299-305.

16. Benzer, H., Ergün, Ş.L., Ersayın, S., 1993, "Investigation of the Effects of  Grinding Aids in Batch Grinding by Kinetic Approach", The 13th Mining Congress of Turkey, May 10-14, pp599-608

 

Theses

 

1.Benzer, A. H., Mathematical Modelling of Rod Mills, MSc, Hacettepe University (in Turkish)

2.Benzer, A. H., Mathematical Modelling of Clinker Grinding Process, PhD, Hacettepe University, (in Turkish)