H.U. Department of Mining Engineering Hacettepe University Turkish Projects Theses Courses Publications Resume Home

PUBLICATIONS

 

Articles

 

  1. Ergün, Ş.L., Ersayın, S., 2002, Studies on pinched sluice concentration:Part1- The effects of operating variables and sluice geometry on the performance of pinched sluices, Minerals Engineering,vol. 15, No 6, pp423-435.

  2. Ergün, Ş.L., Ersayın, S., 2002, Studies on pinched sluice concentration:Part2- Characterization of flow over a pinched sluice, Minerals Engineering, vol. 15, No 6, pp437-446.

  3. Benzer, H., Ergün, Ş.L., Lynch, A.J., Öner, M., Günlü, A., Çelik, I.B., Aydoğan, N.,2001, Modelling cement grinding circuits, Minerals Engineering, vol. 14, No 11,pp1469-1482.

  4. Benzer, H., Ergün, Ş.L., Öner, M., Lynch, A.J., 2001, Simulation of open circuit clinker grinding, Minerals Engineering, vol. 14, No 7, pp701-710.

  5. Ergün, Ş.L., Ersayın, S., 1998, Characterization of flow on a pinched sluice and its effect on separation, Chapter 8 in Innovation in Physical Separation Technologies, IMM, London, pp85-98.

  6. Ersayın, S., Sönmez, B., Ergün, Ş.L., Aksanı, B., Erkal, İ. F., 1993, Simulation of grinding circuit at Gümüşköy silver plant, Turkey, Trans IMM, Sect. C, January-April, vol.102, C32-38.

  7. Dikmen, S., Ergün, Ş.L., 2004, Stirred ball mills, Bull. of Turkish Chamber of Mining Engineers,  December, 43(4), pp 3-15.

  8. Doğru, T., Ergün, Ş.L., 2004, Modelling and simulation of the slag grinding circuit at KBI Samsun smelter, Bull. of Turkish Chamber of Mining Engineers, September 2004, 43, (3), pp13-26 (in Turkish).

  9. Aydoğan, N., Ergün, Ş.L., 2004, High Pressure Grinding Rolls, Mining Journal, September, 43, (3), sf27-37. (in Turkish)

  10. Erdem A.S., Ergün, Ş.L., Benzer, A.H., 2004, Calculation of the power draw of dry multi-compartment ball mills, Physicochemical Problems of Mineral Processing, vol. 38, pp221-230.

  11. Genç, Ö, Ergün, Ş.L., Benzer, A.H., 2004, Single particle impact characterization of materials by drop weight testing, Physicochemical Problems of Mineral Processing, vol. 38, pp241-255.

  12. Ergün, Ş.L., Ekmekçi, Z., Gülsoy, Ö.Y, Benzer, A.H., 2004, Modelling and simulation of  the grinding circuit in Madneuli copper concentrator,  Physicochemical Problems of Mineral Processing, vol. 38, pp231-240.

  13. Ergün, Ş.L., Ekmekçi, Z., Gülsoy, Ö.Y, Benzer, A.H., 2004, The evaluation of a copper flotation plant performance by plant survey and laboratory tests, Physicochemical Problems of Mineral Processing, vol. 38, pp95-102.

  14. Doğru, T., ve Ergün, Ş.L., 2004, “Investigation of the Effect of Cooling Duration on the Breakage Characteristics of Smalter Slags of KBI Samsun Smelter” Bull. of Turkish Chamber of Mining Engineers, June 2004, 43, (2), pp25-36. (in Turkish).

  15. Ergün, Ş.L., Gülsoy, Ö.Y, Aydoğan, N., 2003, Evaluation of the New Modelling approach Developed for Flotation Plant Design and Optimisation, Mining Journal, September, 42, (3), sf11-23.

  16. Ergün, Ş.L., Ersayın, S., 2000, Performance evaluation in a small scale gravity concentration plant, Physicochemical Problems in Mineral Processing, 34, pp111-131.

  17. Ergün, Ş.L., Gülsoy, O. Y., Ersayın, S., 1994, Pinched sluices, Bull. of Turkish Chamber of Mining Engineers, March,  pp5-16(in Turkish).

  18. Ersayın, S., Aksanı, B., Ergün, Ş.L., Erkal, İ.F., Gülsoy, Ö.Y., Sönmez, B., 1994, Performance evaluation at the grinding circuit of Gümüşköy silver plant, Les Techniques, Nov., pp31-35.

  19. Anaç, S., Ersayın, S., Ergün, Ş.L., Gülsoy, Ö. Y., Reichert cones, Etibank Bulletin, No 110-111, May 1988, pp29-36 (in Turkish).

 

Papers

 

  1. Ergün, Ş.L., Ekmekçi, Z., Gülsoy, Ö.Y, Can, M., Orhan, E.C., Dikmen, S., Obut, A., 2000, Investigations on the alternatives to obtain finer flotation feed at Kure grinding circuit by simulation, Mineral Processing on the Verge of the 21st Century, Özbayoğlu et al. (eds), A.A.Balkema Publishers, pp59-64.

  2. Ergün, Ş.L., Ersayın, S., Gülsoy, Ö.Y., Ekmekçi, Z., Can, M., Aslan, A., 2000, Modelling and simulation of grinding circuit at Cayeli Bakir İsletmeleri A.S. (CBİ) flotation plant, Mineral Processing on the Verge of the 21st Century, Özbayoğlu et al. (eds), A.A.Balkema Publishers, pp65-70.

  3. Ekmekçi, Z., Aslan, A., Ergün, Ş.L., Gülsoy, Ö.Y., Can, M., 2000, Interactive effects of pulp potential and oxygen content on copper-zinc separation at Çayeli Bakır İşletmeleri A.Ş. (CBİ) Flotation Plant, Mineral Processing on the Verge of the 21st Century, Özbayoğlu et al. (eds), A.A.Balkema Publishers, pp.281-286.

  4. Gülsoy, Ö.Y, Ekmekçi, Z., Ergün, Ş.L., Kılavuz, F., Karapınar, N., Hassoy, H., 2000, Cell-by-cell approach for performance evaluation in flotation circuits, Mineral Processing on the Verge of the 21st Century, Özbayoğlu et al. (eds), A.A.Balkema Publishers, pp.291-294.

  5. Ersayın, S., Ergün, Ş.L., Benzer, H., 1994, The effects of heat treatment on grinding and liberation of chromite ores, in Progress in Mineral Processing Technology, Eds:Demirel, H., Ersayın, S., A.A. Balkema Publishers, pp33-37.

  6. Anaç, S., Ergün, Ş.L., Sönmez, B., 1994, Effects of some variables on the cumulative basis kinetic model parameters in ball mill grinding, in Progress in Mineral Processing Technology, Eds:Demirel, H., Ersayın, S., A.A. Balkema Publishers, pp533-538.

  7. Ergün, L., Gülsoy, Ö.Y., Can, M., Benzer, H., 2005"Performance Evaluation Studies in Çayeli Grinding Circuit", 19th International Mining Congress and Fair, pp.213-222.

  8. Ekmekçi Z, Can M., Ergün L., Gülsoy Ö.Y., Benzer H., Çelik İ.B., 2005 “Performance Evaluation of CBI Flotation Plant Using Mineralogical Analysis”, 19th International Mining Congress and Fair, pp233-240.

  9. Ergün L., Gülsoy Ö.Y., Can M., Benzer H., 2005 “Optimization of Cayeli Grinding Circuit By Modelling and Simulation”, 19th International Mining Congress and Fair, pp309-320.

  10. Ergün, Ş.L.,  Gülsoy, Ö.Y., Orhan, E.C., Obut, A.,  Dikmen, S.,  Hassoy, H., 2004, Performance Evaluation Studies in Kırka-A Boron Concentrator, 2nd International Symposium on Boron Ores, 23-25 Sept. 2004 Eskişehir-Turkey, pp71-79.

  11. Aydoğan, N., Ergün, Ş.L., Benzer, H., 2004, HPGR applications in the cement industry,  JKMRC International Student Conference 2004, 6-7 September, Brisbane, pp33-48. Benzer, H., Ergün, Ş.L., Lynch, A.J., Öner, M., 2003, Case studies of models of tube mill and air separator grinding circuits, Proceedings of XXII International Mineral Processing Congress, Chief Editors: L. Lorenzen and D.J. Bradshaw, 29th September- 3rd October 2003, Cape Town, South Africa, pp1524-1533.

  12. Aydoğan, N., Ergün, Ş.L., Benzer, H., Kaya, M., 2002, Investigation of the performance of high pressure grinding rolls at Nuh cement plant, 9th Int.Min.Pro.Symposium, Extended Abstracts, pp26-27.

  13. Ergün, Ş.L., Gülsoy, Ö.Y. , Aksanı, B., Mian, N., 2002, Comparison of simulation results with the actual performance at the grinding circuit of Çayeli Bakır İşletmeleri A.Ş.,  9th Int.Min.Pro.Symposium, Extended Abstracts, pp143-144.

  14. Genç, O., Benzer, H., Ergün, Ş.L., Öner, M., 2002, Investigation of breakage behaviour of clinker particles by drop-weight testing, 9th Int.Min.Pro.Symposium, Extended Abstracts, pp145-147.

  15. Özer, C.E., Ergün, Ş.L., Benzer, H., 2002, Modelling of the classification behaviour of the diaphragms used in multi-compartment mills, 9th Int.Min.Pro.Symposium, Extended Abstracts, pp148-150.

  16. Ergün, Ş.L., Gülsoy, Ö.Y., Ekmekçi, Z., Benzer, H., 2002, Simulation studies at Madneuli copper flotation plant, 9th Int.Min.Pro.Symposium, Extended Abstracts, pp151-153.

  17. Gülsoy, O.Y, Ekmekçi, Z., Ergün, Ş.L., 2001, Performance evaluation of copper rougher circuit in Kure flotation plant, Mineral Processing 2001, 2-3 August, Cape Town-South Africa(extended abstract)

  18. Doğru, T., Ergün, Ş.L., et.al., 2001, Performance evaluation studies at Madneuli-Georgia copper flotation plant, Proc. of 9th Balkan Mineral Processing Congress, pp459-465.

  19. Doğru, T., Ergün, Ş.L., Çelik, İ.B., 2001, Determination of breakage properties of copper smelter slags, New Trends in Mineral Processing IV, 28-30 June, Ostrava, pp151-157. Benzer, H., Ergün, Ş.L., Çelik, İ.B., Günlü, A., Aydoğan, N.A., 2001, Design and optimization of cement grinding circuits using simulation, New Trends in Mineral Processing IV, 28-30 June, Ostrava,pp199-206.

  20. Doğru, T., Ergün, Ş.L., An investigation of autogeneous grinding properties of copper smelting slags at BCW’s Samsun smelter, 17th Turkish Mining Congress, 19-22th June,  Ankara, pp153-159 (in Turkish).

  21. Bayraktar, İ,  Ersayın, S., Ergün, Ş.L. vd.,  et al., 1999, Comparison of design figures with operational results in Cimentas-Gazbeton quarzite grinding plant, The 16th Mining Congress of Turkey, pp303-311(in Turkish).

  22. Siyahhan, S., Ergün, Ş.L., 1999, Effect of ore characteristics on the performance of a pinched sluice,  The 16th Mining Congress of Turkey, pp313-319(in Turkish).

  23. Ergün, Ş.L., Siyahhan, S., Can, N.M., Benzer, H., 1999, Performance of a pinched sluice for the concentration of very low grade chromite ore, 8th Balkan Mineral Processing Congress, pp471-478.

  24. Ergün, Ş.L., Ersayın, S., 1998, The design of multi-stage pinched sluice concentration circuits using single stage test results, Innovations in Mineral and Coal Processing, Atak, S., Önal, G., Çelik, M.S. (Eds.), A.A. Balkema Publishers. pp717-721.

  25. Ergün, Ş.L., Gülsoy, Ö.Y., Aksanı, B., Ersayın, S., 1996, The effects of operating parameters on the performance of a pinched sluice, Changing Scopes in Mineral Processing, Kemal, M., Akar, A., Canbazoğlu, M., Arslan, V. (Eds.), A.A. Balkema Publishers, pp111-118.

  26. Ersayın, S., Ergün, Ş.L., Gülsoy, Ö.Y., 1995, Search for an alternative flowsheet for magnesite ores of Konya district, 6th Mineral Processing Congress of Balkans, 18-22th September, Macedonia, pp451-461.

  27. Gülsoy, Ö., Ergün, Ş.L., Kulaksız, S., 1994, Beneficiation of nepheline syenites in Turkey, 4th International Conference for Mining, Petroleum and Metallurgical Engineering, 5-7th February, pp192-201.

  28. Ergün, Ş.L., Ersayın, S., 1994, Performance evaluation at Sori chromite plant, 4th International Conference for Mining, Petroleum and Metallurgical Engineering, 5-7th February,pp10-18.

  29. Ergün, Ş.L., Benzer, H., Ersayın, S., 1993, Ergün, Ş.L., Benzer, H., Ersayın, S., 1993, Investigation of the effects of grinding aids in batch grinding by kinetic approach, The 13th Mining Congress of Turkey, May 10-14, pp599-608 (in Turkish).

  30. Ersayın, S., Aksanı, B., Ergün, Ş.L., Erkal, İ. F., Gülsoy, Ö.Y., Sönmez, B., 1993, Investigation of a grinding problem by computer simulation,  Proc. of the Int. Congress on Computational Methods in Engineering, Shiraz, Iran, 2-6 May, pp27-34.

  31. Demirel, H., Ergün, Ş.L., Gülsoy, Ö.Y., Ekmekçi, Z., 1992, Factors affecting flotation of silicates from magnesite, presented in 7th Engineering Week, University of Akdeniz, Isparta, 25-29 May (in Turkish) Preprint.

  32. Ergün, Ş.L., Ersayın, S., Yönet, A.T., 1992, Effects of heat treatments on grinding and liberation, presented in 7th Engineering Week, University of Akdeniz, 25-29 May (in Turkish) Preprint.

  33. Demirel, H., Ergün, Ş.L., Gülsoy, Ö.Y., Ekmekçi, Z., 1991, Development  of magnetic separation flowsheet for magnesite ores, 4th International Mineral Processing Symposium, 20-22th Oct., Antalya-Turkey, pp576-588 (in Turkish).

  34. Ersayın, S., Aksanı, B., Ergün, Ş.L., Erkal, İ.F., Gülsoy, Ö.Y., Sönmez, B., 1992, Performance evaluation at the grinding circuit of Gümüşköy Silver Plant, IV. Uluslararası Cevher Hazırlama Sempozyumu, 20-22 Ekim, sf 42-55.

  35. Ersayın, S., Sönmez, B., Ergün, Ş.L., Aksanı, B., Erkal, İ.F., 1991, Simulation of grinding circuit at Gümüşköy silver plant, Computer Solutions in Mining and Processing, International Conference, September 23-24, Leeds, England, Preprint.

  36. Ersayın, S., Ergün, Ş.L., Gülsoy, Ö.Y., Sönmez, B.,  The effect of laboratory wet and dry grinding on the kinetic characterization of a grinding circuit, Second Symposium on Application of Mathematical Methods and Computers in Geology, Mining and Metallurgy, Belgrade-YUGOSLAVIA, Oct. 1991, Preprint.

  37. Ersayın, S., Ergün, Ş.L., Gülsoy, Ö. Y., Beneficiation of magnesite tailings by means of magnetic separators, The12th Mining Congress of Turkey, Ankara-TURKEY, May 1991, pp258-267 (in Turkish).

  38. Ersayın, S., Ergün, Ş.L., Gülsoy, Ö. Y., Beneficiation of magnesite ore using dry high intensity permanent magnets, 4th International Ceramics Technical Congress, December 1990, pp371- 381 (in Turkish).

  

Theses

 

1.  Ergun, S.L., 1995, "An Investigation of Flow Conditions and Geometrical Parameters in Pinched Sluice Concentration", Ph.D. Thesis, Dept. of Mining Engineering, University of  Hacettepe, Ankara-Turkey, 195 p (in Turkish).

2.  Ergun, S.L., 1990, "Performance Evaluation at Sori Chromite Concentrator with Respect to Its Modernization", M.Sc. Thesis, Dept. of Mining Engineering, University of  Hacettepe, Ankara-Turkey, 56 p (in Turkish).